Rising Damp Treatment

Rising Damp Treatment

Salt-Resistant Replastering

Contaminated plaster stripped back to masonry and replaced with a salt-resistant render system or lime plaster so damp patches do not return.

Free Rising Damp Treatment quote

No obligation. We only use your details to reply about this job.

Salt-Resistant Replastering — Rising Damp Treatment

What's involved

Plaster that has absorbed ground salts will keep drawing moisture from the air, so it has to come off. The team hacks back plaster to bare masonry, usually to about one metre or at least 300 millimetres above the highest visible damp. For modern brick homes, a salt-resistant sand and cement render with a waterproofing additive is applied, then finished with a lightweight plaster skim. Gypsum plaster must not be used directly on the damp area, because it breaks down when wet. In older solid-walled homes, a breathable lime plaster is often better, as it lets residual moisture escape. Plastering takes one to three days per room, plus drying time. Expect dust, so clear rooms and seal doors before work starts.

How we handle it

  1. Tell us the symptoms

    Use the quote form to describe where damp shows, how high it reaches, the age of the property and whether any treatment has been done before.

  2. Confirm the cause

    A specialist inspects inside and out, maps moisture up the wall and tests where needed to confirm rising damp rather than another source.

  3. Receive a fixed price

    You get one clear price covering bridging repairs, the damp barrier, plaster removal, replastering and any timber replacement agreed.

  4. Treatment works

    The team protects your home, removes contaminated plaster, installs the barrier, replasters with the right system and repairs timbers.

  5. Drying and handover

    You get guidance on drying times and decorating, plus written details of the work and any guarantee for your property file.

Price guide

Rising damp treatment is priced on the length of wall affected, the height of plaster removal and the plaster system used. A single wall in a terraced house costs far less than treating a whole ground floor. Timber repairs and bridging work add to the total. These are guide prices for 2026 for typical UK homes.

  • Single wall treatment with replastering: £500–£1,200. Injection barrier plus salt-resistant replastering along one internal wall of an average room.
  • Full room treatment: £1,200–£2,800. All affected walls in one room, including plaster removal, replastering and new skirtings.
  • Ground floor of a terraced house: £2,500–£6,000. Several walls and rooms treated, depending on wall length, plaster height and access.

Questions about salt-resistant replastering

Can rising damp be treated without injection?

Yes, in some cases. If the existing damp proof course is sound but bridged, lowering ground levels or cutting back render may be enough. In older homes without a DPC, improving drainage and using breathable lime plaster can manage moisture effectively. The right approach depends on the wall construction and cause.

Can rising damp damage floors?

Yes, long-term rising damp can rot skirting boards, joist ends and floorboards in contact with damp walls. Timber kept above about 20% moisture content for long periods is at risk of fungal decay. Specialists lift boards to inspect and replace damaged timber as part of treatment.

Why does plaster need replacing after rising damp treatment?

Plaster that has been wet for years contains ground salts, mainly nitrates and chlorides. These salts attract moisture from the air, so the plaster stays damp even after the new barrier stops water rising. Removing it and replastering with a salt-resistant or breathable system prevents damp patches from coming back.

Get a free rising damp treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote