Rising Damp Treatment

Rising Damp Treatment glossary

The terms you'll come across, explained in plain English.

Breathable construction
Building with materials such as lime mortar, lime plaster and limewash that allow moisture to pass through and evaporate rather than trapping it.
Capillary action
The way water is drawn upwards through tiny pores in brick, stone and mortar, against gravity. It is the mechanism behind rising damp.
Efflorescence
White powdery or fluffy salt crystals left on a wall surface when moisture evaporates. Common as walls dry out after treatment and best brushed off dry.
Foil test
A simple check where foil is taped to a damp wall. Moisture on the room side suggests condensation, while moisture underneath suggests damp within the wall.
French drain
A trench filled with gravel, usually with a perforated pipe, along a wall base to collect water and lower ground moisture against the wall.
Ground salts
Chlorides and nitrates carried up from the ground by rising damp. Their presence in plaster samples is strong evidence that moisture has come from below.
Gypsum plaster
The standard modern interior plaster. It is sensitive to moisture and salts, so it is unsuitable for walls that have had rising damp until they are fully dry.
Hygroscopic
Describes materials, such as some ground salts, that absorb moisture from the air. Hygroscopic salts can keep plaster damp after the original source has stopped.
Joist end
The end of a floor joist that sits in or against the wall. Damp masonry can cause decay here, so ends are often cut back and isolated from the wall.
Lime plaster
A traditional breathable plaster made with lime binder. It lets moisture and salts move through and evaporate, which suits solid-walled older buildings.
Mist coat
A thinned first coat of emulsion applied to new plaster. On treated walls it should be breathable so the wall can continue drying.
Salt-resistant plaster
A plaster system, often cement-based with additives, designed to hold back ground salts in a treated wall so they do not stain or break down the new surface.
Tide mark
A brownish line on a wall marking the highest point reached by rising moisture, where salts concentrate as the water evaporates.
Timber grounds
Timber battens or blocks fixed to walls behind skirtings and architraves. They often rot where walls are damp and should be checked during treatment.
Wall plate
A length of timber laid along a wall to carry floor joists or roof timbers. In damp walls it is vulnerable to wet rot and dry rot.

Get a free rising damp treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote