Rising Damp Treatment

Rising Damp Treatment

Damp Barrier Installation

A new horizontal barrier created by injecting a water-repellent cream into the mortar, or by inserting a membrane, to stop moisture climbing further.

Free Rising Damp Treatment quote

No obligation. We only use your details to reply about this job.

Damp Barrier Installation — Rising Damp Treatment

What's involved

Once rising damp is confirmed, a new barrier stops more water climbing the wall. Most specialists use a silane or siloxane cream injected into a mortar bed close to floor level. On solid walls the holes are drilled from one side to most of the wall's depth, while thicker walls are drilled from both faces. Cavity walls are treated from the outside leaf and the inner leaf separately, with the cavity checked for rubble first. In walls where injection will not spread evenly, such as random rubble stone, a physical membrane or an alternative approach may be proposed. The barrier is only half the job, because moisture already in the wall and salts in the plaster still need dealing with afterwards.

How we handle it

  1. Tell us the symptoms

    Use the quote form to describe where damp shows, how high it reaches, the age of the property and whether any treatment has been done before.

  2. Confirm the cause

    A specialist inspects inside and out, maps moisture up the wall and tests where needed to confirm rising damp rather than another source.

  3. Receive a fixed price

    You get one clear price covering bridging repairs, the damp barrier, plaster removal, replastering and any timber replacement agreed.

  4. Treatment works

    The team protects your home, removes contaminated plaster, installs the barrier, replasters with the right system and repairs timbers.

  5. Drying and handover

    You get guidance on drying times and decorating, plus written details of the work and any guarantee for your property file.

Price guide

Rising damp treatment is priced on the length of wall affected, the height of plaster removal and the plaster system used. A single wall in a terraced house costs far less than treating a whole ground floor. Timber repairs and bridging work add to the total. These are guide prices for 2026 for typical UK homes.

  • Full room treatment: £1,200–£2,800. All affected walls in one room, including plaster removal, replastering and new skirtings.
  • Single wall treatment with replastering: £500–£1,200. Injection barrier plus salt-resistant replastering along one internal wall of an average room.
  • French drain at wall base: £80–£150 per metre. Excavating a gravel-filled trench with drainage to lower ground moisture against the wall.

Questions about damp barrier installation

Does rising damp affect upstairs walls?

No, rising damp only affects walls at ground level and rarely goes above about 1.2 metres. Damp on upstairs walls is usually caused by penetrating damp from roofs, gutters or walls, plumbing leaks or condensation. If you see damp upstairs, look for another cause.

Can rising damp be treated without injection?

Yes, in some cases. If the existing damp proof course is sound but bridged, lowering ground levels or cutting back render may be enough. In older homes without a DPC, improving drainage and using breathable lime plaster can manage moisture effectively. The right approach depends on the wall construction and cause.

How long does it take for walls to dry after rising damp treatment?

Walls usually dry at about 25 mm of thickness per month, so a solid 225 mm brick wall can take nine months or more. Thicker stone walls take longer. Keep rooms heated and ventilated, use breathable paint and avoid fitting units tight against treated walls during this time.

Get a free rising damp treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote