Rising Damp Treatment

Rising Damp Treatment

Breathable Treatment for Older Homes

A conservation-led approach for solid-walled period properties, using drainage, lime and vapour-open finishes rather than impermeable products.

Free Rising Damp Treatment quote

No obligation. We only use your details to reply about this job.

Breathable Treatment for Older Homes — Rising Damp Treatment

What's involved

Many pre-1900 homes were built without a damp proof course and were designed to let moisture evaporate freely. Problems often start when modern materials trap it: cement render outside, gypsum plaster and vinyl paint inside, and concrete floors laid against the walls. A breathable approach reverses these changes. Ground levels are lowered and French drains installed to move water away from the wall base. Cement render and pointing are replaced with lime. Inside, gypsum is removed and replaced with lime plaster and a breathable paint such as limewash or clay paint. This route takes longer for walls to settle but works with the building rather than against it, and it is often the right choice for listed or conservation area homes.

How we handle it

  1. Tell us the symptoms

    Use the quote form to describe where damp shows, how high it reaches, the age of the property and whether any treatment has been done before.

  2. Confirm the cause

    A specialist inspects inside and out, maps moisture up the wall and tests where needed to confirm rising damp rather than another source.

  3. Receive a fixed price

    You get one clear price covering bridging repairs, the damp barrier, plaster removal, replastering and any timber replacement agreed.

  4. Treatment works

    The team protects your home, removes contaminated plaster, installs the barrier, replasters with the right system and repairs timbers.

  5. Drying and handover

    You get guidance on drying times and decorating, plus written details of the work and any guarantee for your property file.

Price guide

Rising damp treatment is priced on the length of wall affected, the height of plaster removal and the plaster system used. A single wall in a terraced house costs far less than treating a whole ground floor. Timber repairs and bridging work add to the total. These are guide prices for 2026 for typical UK homes.

  • Ground floor of a terraced house: £2,500–£6,000. Several walls and rooms treated, depending on wall length, plaster height and access.
  • Full room treatment: £1,200–£2,800. All affected walls in one room, including plaster removal, replastering and new skirtings.
  • Single wall treatment with replastering: £500–£1,200. Injection barrier plus salt-resistant replastering along one internal wall of an average room.

Questions about breathable treatment for older homes

How much does rising damp treatment cost?

Rising damp treatment typically costs £500–£1,200 for a single wall with replastering, £1,200–£2,800 for a full room and £2,500–£6,000 for the ground floor of a terraced house. Costs depend on wall length, plaster height, the plaster system and any timber repairs needed.

Why does plaster need replacing after rising damp treatment?

Plaster that has been wet for years contains ground salts, mainly nitrates and chlorides. These salts attract moisture from the air, so the plaster stays damp even after the new barrier stops water rising. Removing it and replastering with a salt-resistant or breathable system prevents damp patches from coming back.

How long does it take for walls to dry after rising damp treatment?

Walls usually dry at about 25 mm of thickness per month, so a solid 225 mm brick wall can take nine months or more. Thicker stone walls take longer. Keep rooms heated and ventilated, use breathable paint and avoid fitting units tight against treated walls during this time.

Get a free rising damp treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote